Recent Comments
Hello and welcome to my site. My name is Olga and I love everything crafty. I especially love making crafts with my daughter Ann. Here you can find lots of tutorials about simple crafts that you can make with your kids. If you have any questions, please do not hesitate to contact me.
Origami Card Holder
Step-by-step instructions:
1
Take a square sheet of paper for origami.
2
Fold the workpiece in two vertically.
3
Unfold the workpiece.
4
Turn the right part up to the central bend line.
5
Now turn the left part up to the central bend line.
6
Unfold the workpiece.
7
Turn the right lower corner of 1/4 of the sheet up.
8
Turn the rest three corners up.
9
Then turn the half of the workpiece right part up to the central bend line.
10
Turn the half of the left part symmetrically above.
11
Turn over the workpiece.
12
Turn the workpiece lower part up so that the corners turn before were placed in a V-like way.
13
Then turn the workpiece upper part down so that the corners turn before are placed in a V-like way. The upper and the lower flaps should collide with each other a little.
14
Unfold the workpiece to 90 degrees clockwise. Insert the left part corners into the workpiece right part.
15
Turn the workpiece to the 90 degrees anticlockwise. Bend the workpiece in two vertically. Pay attention that the bend should be made along the centerline, to which the right and the left parts of the reverse come.
16
Insert a card into your Card Holder. An original construction for your cards keeping is finished!
